Waterproofing that holds — toilets, roofs, walls and concrete.
Singapore waterproofing contractor for wet-area membranes, roof and RC slab systems, external wall and facade coatings, PU injection grouting and basement tanking. Diagnosis first, then a method statement, then the work — under SS 637 and BCA wet-area guidance.
Six waterproofing service lines, one contractor.
Wet-area, roof, external wall, injection, basement and inspection. Each scope is treated as a method, not a product — the substrate and the defect drive the system, not the brochure on the tin.
Wet-area waterproofing for toilets, bathrooms, kitchens and yard service areas. Floor screed, perimeter walls and pipe penetrations treated as one continuous tanked system.
Read serviceExposed roof, terrace, planter box and RC slab waterproofing. Torch-on bitumen, liquid PU, cementitious and acrylic systems with upstand detailing and protection layer.
Read serviceExternal wall and facade waterproofing on plastered, painted and rendered surfaces. Crack repair, sealant joint replacement and elastomeric weatherproof coatings.
Read servicePolyurethane injection grouting for active leaks through cracked concrete, construction joints, basement walls and lift pits. Epoxy injection for structural crack rebonding.
Read serviceBasement, foundation, retaining wall, lift pit and water tank waterproofing. Crystalline systems, cementitious tanking and combined PU injection.
Read serviceIndependent waterproofing inspection and defect diagnosis. Moisture mapping, leak tracing and report-grade documentation before remedial scope is committed.
Read serviceDiagnosis before scope. Membrane is a small part of the job.
Most "waterproofing failures" we are called to are not membrane failures. They are missing wall upturns, missing pipe collars, untreated cracks, and skipped ponding tests. Putting a new membrane over the same defects gives the same result.
Every job starts with a diagnosis — moisture mapping, leak trace, joint and crack inspection — before the method statement is written. The right material follows the diagnosis, not the other way around.
See our diagnosis approachReferences we work to
- SS 637:2018 — Code of Practice for Waterproofing of RC Buildings
- BCA Waterproofing for Internal Wet Areas
- BCA CONQUAS / Quality Mark
- SS 677:2021 — Precast joints / weather-tightness
From the technical notebook
Contractor-side notes on materials, diagnosis and method statements. Written for owners, MCSTs and consultants who want to understand the scope before they buy it.
Cementitious vs Acrylic Waterproofing Membranes for External Walls in Singapore
How cementitious and acrylic external wall waterproofing systems differ on substrate compatibility, movement tolerance and exposure — and which fits the defect you are actually trying to fix.
Read articleCrack Repair and Waterproofing After Facade Inspection: What Building Owners Should Know
How a Periodic Facade Inspection report flows into a rectification scope — crack repair, joint resealing and external wall waterproofing — and what the building owner is actually agreeing to.
Read articleHow Cracked and Uncracked Concrete Affect Rainwater Seepage in Singapore Buildings
Why a hairline crack can leak through a slab while neighbouring concrete stays dry — and what the diagnosis tells you about the right treatment.
Read articlePart of the Ezzogenics contractor network.
Waterproofing Singapore is operated by Ezzogenics Pte Ltd. Where a scope crosses into statutory Periodic Facade Inspection or high-level access, we coordinate with related contractor sites in the same network.
- Facade Inspection Singapore
Statutory PFI under the BCA framework. - Work At Height Singapore
Rope access, boomlift and MEWP access planning. - Rope Access Singapore
Rope-access specialist reference.
Tell us about the leak.
Share the building, the affected area and any photos. We will reply with a draft scope, a probable cause and a price range.